Low cost triaxial vibration sensor model 131

Low cost triaxial vibration sensor model 131 屬性

---

Low cost triaxial vibration sensor model 131 描述

Industrial, triaxial vibration sensors use piezoceramic in the annular shear mode, have dual case isolation with an internal faraday shield, use 甀CP / 甀EPE transmission mode.

Note about old compression design accelerometer.

Compare to obsolete compression design, annular shear piezoelectric sensors feature better frequency response, improved base strain, lower noise, smaller size, thermal transient imunity and insensitivity to cable motion. Annular shear mode is also less susceptible to transverse vibrations and better immune to electronic saturation at high frequency.

Why industrial triaxial vibration sensors are bigger than laboratory ones.

Triaxial industrial sensors require dual case isolation provided by an internal Faraday shield. Laboratory triaxial sensors are only isolated (if at all) by an external isolation pad on the mounting surface or by an anodised aluminum housing. They are therefore prone to ground loop and 50 Hz or 60 Hz pickup. In harsh environments, industrial vibration sensors don抰 allow for such solutions.

　



　
Low cost triaxial vibration sensor model 131

Available with the following sensitivities 10, 50, 100, 500, 1000 mV/g
Available only with M12 connector

42 x 42 mm x 23 mm, 240 grammes

English / French / German

Cross Reference List : Wilcoxon 993B-7-M12 / CTC AC230-1D


Low size triaxial vibration sensor model 138

Available with the following sensitivities 10, 50, 100 mV/g
Available only with M12 connector

41 x 27 mm x 16.8 mm, 84 grammes

English / French /German

Cross Reference List : Wilcoxon 993B-7-M12 / CTC AC230-1D




TO-5 Transistor style piezoelectric accelerometer
TO-5 solid state piezoelectric accelerometers offer low cost solution for vibration and shock measurements in high-volume and commercial OEM applications. The compact designs may be embedded into machinery at the OEM level to provide value-added monitoring protection. The units employ field-proven, solid-state, annular shear piezoelectric sensing elements.
They are available with charge, voltage or 甀CP / 甀EPE output. They offer better resolution and broader frequency range compare to MEMS or capacitive accelerometers. They are therefore mainly used for predictive maintenance, condition monitoring, bearing and gear mesh vibration measurements, ...

　



　
Piezoelectric Vibration Sensor Model 160
Available with :
charge output (11 pC/g)
voltage output (3 wires) 25, 50, 100 mV/g
ICP output (2 wires) 10, 100 mV/g
dia 9mm, 3 grammes (0.1 Oz)

English

Cross reference list : PCB Series 660 Low cost embeddable accelerometers.




Piezovelocity Vibration Sensors
Industrial, Piezovelocity sensors use piezoceramic in the annular shear mode and provide 100mV/in/sec. They use the 甀CP / 甀EPE industry standard transmission mode. Piezovelocity sensors use an internal integration circuit which inherently decrease high frequency signals allowing better measurements of low frequency signal.
Paper machine dryers (when steam leaks), pumps (cavitation high frequency noise) are prone to such phenomenom.

Note about old compression design accelerometer.
Compression design accelerometer could not be used for piezovelocity sensor because they are
- sensitive to base strain
- sensitive to cable motion
- too big (compare to shear design) for the same charge output.
Annular shear accelerometer is the only valid design for such sensor.



　
Piezovelocity Sensor Model 111
100 mV/in/sec (4 mV/mm/sec)
Available with: MIL-C-5015, M12 or IP69K Integral cable
Available with temperature output (10mV/癈)
Hex 22 x 47 mm, 85 grammes

English



Cross Reference List : Wilcoxon 793V (2) / CTC VE101-1A / Monitran MTN/1600 (2)
　


Piezovelocity Sensor Model 113
100 mV/in/sec (4 mV/mm/sec)
Available with: MIL-C-5015, M12 or IP69K Integral cable
Available with temperature output (10mV/癈)
25 x 25 x 53 mm, 165 grammes, M6 or 1/4" 28 mounting

English



Cross Reference List : Wilcoxon 797V / CTC VE102-1A




Premium General Purpose Industrial Piezoelectric Vibration Sensors
4-20 mA piezoelectric vibration sensors are design to monitor the vibration in harsh industrial environment. It uses the industry standard 4-20 mA loop that interfaces directly with PLC, DCS and 4-20mA monitor. VibraSens transmitters are using state of the art annular shear design.

Note about obsolete compression design transmitter.
Compression design 4-20 mA velocity vibration transmitter are limited to a low frequency = 10Hz.
It means that you will not able to monitor (velocity parameter) machine runing below 500 RPM.
Annular shear vibration transmitter is the only design able to measure machine down to 150 RPM.
Compression design vibration transmitters are also more sensitive to cable motion, transverse vibration and electronic saturation at high frequency.



　
4-20mA Vibration Sensor Model 125
Full scale velocity = 10, 20 mm/sec or 0.5, 1, 2 in/sec
Full scale acceleration = 5, 10, 20, 50 g
MIL-C-5015/M12 connector or IP69K Integral cable
Hex 22 x 47 mm, 85 grammes

English



Cross Reference List : Wilcoxon PC420A / Wilcoxon PC423 / CTC LP202-1A / CTC LP302-1A / CTC LP401-1B / CTC LP404-1A / Monitran/1187 (5) / Monitran MTN/1186 (5) / Monitran MTN/1188 (5) / Hansford HS-420 (5) / Hansford HS-421 (5) / Hansford HS-422 (5)

(5) Old Compression design : 4-20 mA signal will be sensitive to cable motion (base strain sensitivity), not able to measure below 500 RPM.
　


4-20 mA Vibration Sensor Model 127
Full scale velocity = 10, 20 mm/sec or 0.5, 1, 2 in/sec
Full scale acceleration = 5, 10, 20, 50 g
MIL-C-5015/M12 connector or IP69K Integral cable
25 x 25 x 53 mm, 165 grammes, M6 or 1/4" 28 mounting

English



Cross Reference List : Wilcoxon PC421 / Wilcoxon PC423 / CTC LP204-1A / CTC LP304-1A




Cables, Raw
VibraSens offers bulk cables specifically chosen and designed to fit our sensor and withstand the environment (thermal, fire, chemical, radiation,...) of the sensor.
Our cables use material like Teflon FEP, PTFE, Polyurethane, radiation cross link polymer Radox, PVC, ...
　
Twisted pair ( 6 items )
　
Twisted pair cables are used on :

2-pole, ®ICP or equivalent accelerometers
2-pole accelerometers with low impedance output (4-20mA,.)
2-pole Velocimeters and Piezo Velocimeter
Twisted triples ( 4 items )
　
Twisted triples cables are used on :

3-pole, ®ICP or eq. accelerometers with temperature output
3-pole, 4-20 mA accelerometers with acceleration dynamic output
Vibration sensor with Integral cable and temperature or dynamic output
4 Conductors ( 2 items )
　
4 Conductors cables are used on :

Sensor with M12 Connector
3-pole, ®ICP or eq. accelerometers with temperature output
3-pole, 4-20 mA accelerometers with acceleration dynamic output
Vibration sensor with Integral cable and temperature or dynamic output
Low noise cables ( 2 items )


Standard
Standard cable assemblies for Industrial sensor
They are used to connect sensor to a safer environment where standard, multiconductor transmission cable could be used.

Model 10.01 numbering system will let you build your own cable.

10.01 Datasheet English Datasheet

Add Comment (0)
Read more...

IP67 Overmolded cordset with 2 Socket MILStyle connector Model 10.01-B22-A01-05-Length
IP 67 overmolded 2 Socket MIL Style connector
90癈 Polyurethane cable, Gold plated contacts, Stainless steel 316L Nut
Suited for permanent monitoring. Fit piezoelectric vibration sensors with MIL connector.

　

Price for standard length (in stock July 15) :
10 metres - 42 to 60 Euros
20 metres - 61 to 88 Euros
30 metres - 81 to 116 Euros (4 weeks lead time)
50 metres - 120 to 172 Euros (4 weeks lead time)
60 metres - 140 to 200 Euros (4 weeks lead time)

Cross Reference List :
CTC CB102-A2A-015-Z could be replaced by the VibraSens 10.01-B22-A01-02-05
CTC CB102-A2A-030-Z could be replaced by the VibraSens 10.01-B22-A01-02-10

Add Comment (0)

IP67 Overmolded cordset with 2 Socket MILStyle connector Model 10.01-B22-A01-02-Length
IP 65 overmolded 2 Socket MIL Style connector
200癈 Teflon FEP cable, Gold plated contacts, Stainless steel 316L Nut
Suited for permanent monitoring. Fit piezoelectric vibration sensors with MIL connector.
　

Price for standard length (in stock July 15) :
10 metres - 42 to 60 Euros
20 metres - 61 to 88 Euros
30 metres - 81 to 116 Euros (4 weeks lead time)
50 metres - 120 to 172 Euros (4 weeks lead time)
60 metres - 140 to 200 Euros (4 weeks lead time)

Cross Reference List :
CTC CB103-A2A-015-Z could be replaced by the VibraSens 10.01-B22-A01-01-05
CTC CB103-A2A-030-Z could be replaced by the VibraSens 10.01-B22-A01-01-10

Add Comment (0)

IP67 Overmolded M12 cable assembly Model 10.01-A01-E01-31-Length
IP67; overmolded M12 cables
90癈 Polyurethane cable, 360?Shielding, IP67-68, Gold plated contacts.
Suited for permanent monitoring. Fit our piezoelectric vibration sensors with M12 connector.

　

Price for standard length (in stock) :
2 metres - 11 to 16 Euros
5 metres - 16 to 23 Euros
10 metres - 24 to 34.5 Euros
15 metres - 32 to 46 Euros
20 metres - 40 to 57.5 Euros
30 metres - 56 to 80.5 Euros
50 metres - 88.5 to 126.5 Euros (4 Weeks lead time)
60 metres - 104.5 to 149.5 Euros (4 Weeks lead time)

Add Comment (0)

IP67 Overmolded M12 cable assembly Model 10.01-A01-E31-31-Length
M12 overmolded cables
90癈 Polyurethane cable, 360?Shielding, IP67-68, Gold plated contacts.
Suited for permanent monitoring. Fit our piezoelectric vibration sensors with M12 connector.

　

Price for standard length (in stock) :
2 metres - 12.5 to 18 Euros
5 metres - 17.5 to 25 Euros
10 metres - 25.5 to 36.5 Euros
15 metres - 33.5 to 48 Euros
20 metres - 41.5 to 59.5 Euros
30 metres - 57.5 to 82.5 Euros
50 metres - 90 to 128.5 Euros (4 Weeks lead time)
60 metres - 106 to 151.5 Euros (4 Weeks lead time)

Add Comment (0)

IP67 Overmolded M12 cable assembly Model 10.01-A04-E04-31-Length
M12 overmolded cables with Stainless steel protection conduit
90癈 Polyurethane cable, 360?Shielding, IP67-68, Gold plated contacts.
Suited for permanent monitoring with extra mechanical protection. Fit our piezoelectric vibration sensors with M12 connector.

Price for standard length (in stock) :
2 metres - 20 to 29 Euros
5 metres - 34 to 48.5 Euros
10 metres - 57 to 81.5 Euros

Add Comment (0)

IP64 cordset with 2 Socket MIL Style connector Model 10.01-A01-B01-01-Length
MIL-C-5015 2-pole cable assembly
90癈 Shielded Polyurethane cable, IP64, Silver plated contacts.
Connector : aluminum, cadmium olive plated, stainless steel screw
Suited for permanent monitoring. Fit our piezoelectric vibration sensors with MIL-C-5015 connector.

Price for standard length (in stock) :
5 metres - 30.5 to 43.50 Euros
10 metres - 38.5 to 55 Euros
20 metres - 54.5 to 78 Euros
Other length : add 1.60 Euros to 2.3 Euros per metre.

Add Comment (0)

IP64 cordset with 2 Socket MIL Style connector Model 10.01-A01-B01-02-Length
MIL-C-5015 2-pole cable assembly
200癈 Shielded Teflon FEP cable, IP64, Silver plated contacts.
Connector : aluminum, cadmium olive plated, stainless steel screw
Suited for permanent monitoring in high temperature and agressive environment. Fit our piezoelectric vibration sensors with MIL-C-5015 connector.

Price for standard length (in stock) :
5 metres - 36 to 51 Euros
10 metres - 49 to 70 Euros
20 metres - 75.5 to 108 Euros
Other length : add 2.66 Euros to 3.80 Euros per metre.

Add Comment (0)

IP67 cordset with 2 Socket MIL Style connector Model 10.01-A03-B13-02-Length
MIL-C-5015 2-pole cable assembly
200癈 Shielded Teflon FEP cable with stainless steel AISI 316L overbraid, IP67, Gold plated contacts.
Connector : Stainless steel AISI 316L (V4A)
Suited for permanent monitoring in high temperature and agressive environment. Fit our piezoelectric vibration sensors with MIL-C-5015 connector.

Price for standard length (4 weeks lead time) :
5 metres - 71.5 to 102 Euros
10 metres - 89 to 127 Euros
20 metres - 124 to 177.5 Euros
Other length : add 3.55 Euros to 5.05 Euros per metre.

Add Comment (0)

7/16"-27 UNS 2A cable assembly Model 10.01-A01-D01-22-Length
7/16"-27 UNS 2A
250癈 low noise twisted pair shielded PTFE cable, IP64, Gold plated contacts.
Fit high temperature (260癈) accelerometer with charge output (pC/g).

　

Price for standard length :
5 metres - 239 to 342 Euros
10 metres - 299 to 427 Euros
20 metres - 418 to 597 Euros
Connector only (backshell and contacts included) : order 601.01-01 price : 176 to 251.50 Euros

Add Comment (0)
Read more...

Entek IRD datalooger cable assembly Model 10.01-E01-K02-61-05
Lemo K serie, 7 pins datalogger connector to M12 sensor connector
90°C Polyurethane spiral cable, 360° Shielding, IP64, Gold plated contacts.
Fit VibraSens accelerometer with M12 connector and Entek IRD datalooger

　

Price for standard length :
2 metres (5 metres extended)- 90 to 130 Euros

Add Comment (0)

Specific cable Assemblies
Cable assemblies for sensors require special attention. It is not the same as if you were buying commercial BNC cables. They require special tooling, procedure and knowledge that are not off the shelves commercially available.

Overmolding
Removing of the graphite layer on low noise cable
Special crimping machine and backshell to securely clamp the cable
Custom cable designs specifically for our applications and environment.
Extensive knowledge of MIL connectors and specifications


Termination boxes, switch boxes and interface boxes
Termination boxes and switch Boxes assist with data collection by terminating cables of permanently installed sensors at convenient, safe collection points.
BNC termination boxes are not switched, but provide a separate BNC connection for each channel.
Switch boxes have a single BNC connector for data collection and 11 channel rotary dial for channel selection.



　
BNC Interface unit model 301

　

　

　

4 Channels, BNC
Din rail

English

　

　

Add Comment (0)

BNC Interface unit model 300

　

　

　

12 Channels, BNC
Din rail
English

Add Comment (0)

Switch Interface unit model 302

　


11 Channels, Switch
Din rail
English

Add Comment (0)

BNC Cable termination boxes model 751

　


4 Channels, BNC
BNC Termination boxes / enclosures
English

Add Comment (0)

BNC Cable termination boxes model 750

　

　

8 Channels, BNC
BNC Termination boxes / enclosures
English

Add Comment (0)

BNC / Switch Cable termination boxes model 749

　

　

11 / 12 Channels, BNC or Switch
BNC / SwitchTermination boxes / enclosures
English

Add Comment (0)

BNC / Switch Cable termination boxes model 748

　

　

22 / 24 Channels, Switch / BNC
Switch / BNC Termination boxes / enclosures
Price: 180 to 380 Euros
English

---

Low cost triaxial vibration sensor model 131 相關產品