BQ25606RGET BQ25606RGER 有現貨 可添加我們聯系方式獲取最優惠價格
原廠原包原標原裝每一片都來自正規渠道每一片都可追溯
描述
The bq25606 device a highly-integrated standalone 3.0-A switch-mode battery charge management and system power path management device for single cell Li-Ion and Li-polymer battery. The low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase.
The bq25606 highly-integrated standalone 3.0-A switch-mode battery charge management and system power path management device for single cell Li-Ion and Li-polymer battery. It features fast charging with high input voltage support for a wide range of standalone chargers and portable devices. Its low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. Its input voltage and current regulation deliver maximum charging power to battery. The solution is highly integrated with input reverse-blocking FET (RBFET, Q1), high-side switching FET (HSFET, Q2), low-side switching FET (LSFET, Q3), and battery FET (BATFET, Q4) between system and battery. It also integrates the bootstrap diode for the high-side gate drive for simplified system design.
The device supports a wide range of input sources, including standard USB host port, USB charging port, and USB compliant high voltage adapter. The device sets default input current limit based on the built-in USB interface. The device is compliant with USB 2.0 and USB 3.0 power spec with input current and voltage regulation. When the device built-in USB interface identifies the input adaptor is unknown, the device’s input current limit is determined by the ILIM pin setting resistor value. The device also meets USB On-the-Go (OTG) operation power rating specification by supplying 5.15 V on VBUS with constant current limit up to 1.2A.
The power path management regulates the system slightly above battery voltage but does not drop below 3.5 V minimum system voltage. With this feature, the system maintains operation even when the battery is completely depleted or removed. When the input current limit or voltage limit is reached, the power path management automatically reduces the charge current to zero. As the system load continues to increase, the power path discharges the battery until the system power requirement is met. This Supplement Mode prevents overloading the input source.
The device initiates and completes a charging cycle without software control. It senses the battery voltage and charges the battery in three phases: pre-conditioning, constant current and constant voltage. At the end of the charging cycle, the charger automatically terminates when the charge current is below a preset limit and the battery voltage is higher than recharge threshold. If the fully charged battery falls below the recharge threshold, the charger automatically starts another charging cycle.
The charger provides various safety features for battery charging and system operations, including battery negative temperature coefficient thermistor monitoring, charging safety timer and overvoltage and overcurrent protections. The thermal regulation reduces charge current when the junction temperature exceeds 110°C. The STAT output reports the charging status and any fault conditions. Other safety features include battery temperature sensing for charge and boost mode, thermal regulation and thermal shutdown and input UVLO and overvoltage protection.
The device family is available in 24-pin, 4 mm x 4 mm QFN package.
特性
High-Efficiency, 1.5-MHz, Synchronous Switch-Mode Buck Charger
92% Charge Efficiency at 2 A from 5-V Input
Optimized for USB Voltage Input (5 V)
Supports USB On-The-Go (OTG)
Boost Converter With Up to 1.2-A Output
92% Boost Efficiency at 1-A Output
Accurate Constant Current (CC) Limit
Soft-Start Up To 500-μF Capacitive Load
Output Short Circuit Protection
Single Input to Support USB Input and High Voltage Adapters
Support 3.9-V to 13.5-V Input Voltage Range With 22-V Absolute Maximum Input Voltage Rating
Maximum Power Tracking by Input Voltage Limit Up to 4.6 V (VINDPM)
VINDPM Threshold Automatically Tracks Battery Voltage
Auto Detect USB SDP, DCP and Non-Standard Adaptors
High Battery Discharge Efficiency With 19.5-mΩ Battery Discharge MOSFET
Narrow VDC (NVDC) Power Path Management
Instant-On Works with No Battery or Deeply Discharged Battery
Ideal Diode Operation in Battery Supplement Mode
High Integration Includes All MOSFETs, Current Sensing and Loop Compensation
58-μA Low Battery Leakage Current with System Voltage Standby
High Accuracy
±0.5% Charge Voltage Regulation
±6% at 1.2-A and 1.8-A Charge Current Regulation
±5% at 0.5-A, 1.2-A and 1.8-A Input Current Regulation
Create a Custom Design Using the bq25606 With the WEBENCH®Power Designer
深圳市燁弘軒電子有限公司，我司2011年成立于中國經濟特區深圳.我司專注于為全球電子企業提供優質的電子零件供應服務，竭力打造全球品牌元器件零售與批量供應中心。專業經營各類電子元器件（集成電路IC，存儲芯片，分立器件,電源,無源元件,連接器,繼電器,傳感器,光電子,開關,保險元件,緊固件,開發工具,變壓器,測試與測量等）。 我們以低成本提供全方位一站式電子元件供應鏈采購方案，包括但不僅限于電子元件緊急物料搜尋，電子元件齊套供應、電子元件降低成本的長期供應，庫存寄售等一系列供應鏈解決方案。優勢供應各類電子組件.
==================
深圳市燁弘軒電子有限公司 重點客戶遍布中國內地 港 澳 臺地區，另外歐美發達國家以及 一代一路沿線發展中國家我司也有大量長期合作的優質客戶。
==================
深圳市燁弘軒電子有限公司 為一般納稅人 可開具17%增值稅票 有合作基礎可申請月結，延長賬期等多種供貨付款方式。
==================
公司經營目標：整合全球資源全 芯 全意為您服務。
公司服務宗旨：客戶虐我千百遍，我待客戶如初戀。
==================
主營 : 主動電子元器件 集成電路 IC 芯片 （AD TI MAX NXP ST LT XILINX ALTERA）等。
==================
聯系方式: 您可以通過下面任意一種方式 聯系到我們
企業網站：www.yhx-group.com
shype： pretying
阿里旺旺：cd_prety
微信號：yihuazhu666
銷售經理：朱宜華 深圳市燁弘軒電子有限公司 深圳市福田區上步工業區204棟5樓東座516室
電話: 0755-82548684 多線
傳真: 0755-82523504
手機: 13410068358
QQ : 746277983 1520285168
微信號: yihuazhu666
郵箱: zyh1818118@126.com
==================
燁弘軒電子鄭重承諾：
我司所售物料 可提供樣品 批量 方案 技術資料 技術支持。所有物料都是 原廠原包原標原裝，每一片都來自正規渠道，每一片都可追溯。
