燁弘軒電子最新到貨 有最新批號 朱生 13410068358 微信同號 可提供樣品 批量 方案 技術資料 技術支持 竭誠為您提供優質服務。需要查詢更多產品 www.yhx-group.com 。

MAX30112EWG+ MAX30112EWG+T 有現貨 可添加我們聯系方式獲取最優惠價格

原廠原包原標原裝每一片都來自正規渠道每一片都可追溯

The MAX30112 is a complete optical pulse oximetry and heart rate detection integrated analog front-end. The MAX30112 has a high-resolution, optical readout signal-processing channel with built-in ambient light cancellation, as well as high-current LED driver DACs, to form a complete optical readout signal chain. With external LED(s) and photo diode(s), the MAX30112 offers the lowest power, highest performance heart rate detection solution for wrist applications.

The MAX30112 operates on a 1.8V main supply voltage, with a separate 3.1V to 5.25V LED driver power supply. The device supports a standard I2C compatible interface, as well as shutdown modes through the software with near-zero standby current, allowing the power rails to remain powered at all times.

Reflective or Transmissive Heart Rate, Heart Rate Variability, or SpO2Monitoring

Transmit Section

Two 8-bit LED Current DACs

Four Current Ranges 50mA, 100mA, 150mA, 200mA

Low Noise Current Sources for High Peak Transmit to Receive Dynamic Range

Low 160mV Dropout to Support Direct Drive From Rechargeable Li Battery

High Output Impedance and High Supply Rejection to Support Unregulated Supply or Direct Drive From Boost Switcher Supply

Receive Section

19-bit Optical ADC Path to Support the Lowest Perfusions Situations

Low 25pA-RMS Input Referred Noise to Minimize LED Power Under Most Conditions

High Ambient Light Input Range of 200μA and to Support Extraction of HRM Signal in the Most Adverse Lighting Conditions

Built-in Front And Back End Ambient Light Cancellation, Improving Rejection and Eliminating System Complexity of Dealing with Ambient Light

Short Exposure Pulse Widths of 52μs, 104μs, 206μs, 417μs for Efficient Uses of LED Light

Multiple Sample Rate Options from 20sps to 3.2ksps

Ultra-Low-Power Operation for Mobile and Body-Wearable Device

Dynamic Power Down Modes to 100sps for Low-Power Consumption

Full AFE Power Consumption of Less Than 25μA (typ) at 25sps

Large 32 Sample FIFO to Support Batch Processing in the Microcontroller

Variety of System Monitors Mappable to Interrupts to Off-Load System Monitoring Functions From the Microcontroller

Low Shutdown Current = 1.4μA (typ)

I2C interface

Supports a Single 1.8V Supply with Separate 3.1V to 5.25V LED Supply

Miniature 2.8mm x 2.0mm, 6x4, 0.4mm Ball Pitch WLP Package

-40°C to +85°C Operating Temperature Range