The Zynq®-7000 family is based on the Xilinx All Programmable SoC architecture. These products integrate a feature-rich dual-core ARM® Cortex-A9 based processing system (PS) and 28 nm Xilinx programmable logic (PL) in a single device. The ARM Cortex-A9 CPUs are the heart of the PS and also include on-chip memory, external memory interfaces, and a rich set of peripheral connectivity interfaces.

Key Features Dual-core ARM® Cortex™-A9 Based Application Processor Unit (APU) 2.5 DMIPS/MHz per CPU CPU frequency: Up to 1 GHz Coherent multiprocessor support ARMv7-A architecture TrustZone® security Thumb®-2 instruction set Jazelle® RCT execution Environment Architecture NEON™ media-processing engine Single and double precision Vector Floating Point Unit (VFPU) CoreSight™ and Program Trace Macrocell (PTM) Timer and Interrupts 32 KB Level 1 4-way set-associative instruction and data caches (independent for each CPU) 512 KB 8-way set-associative Level 2 cache (shared between the CPUs) Byte-parity support On-chip boot ROM 256 KB on-chip RAM (OCM) Byte-parity support Multiprotocol dynamic memory controller 16-bit or 32-bit interfaces to DDR3, DDR3L, DDR2, or LPDDR2 memories ECC support in 16-bit mode 1GB of address space using single rank of 8-, 16-, or 32-bit-wide memories Static memory interfaces Two 10/100/1000 tri-speed Ethernet MAC peripherals with IEEE Std 802.3 and IEEE Std 1588 revision 2.0 support Two USB 2.0 OTG peripherals, each supporting up to 12 Endpoints Two SD/SDIO 2.0/MMC3.31 compliant controllers Two full-duplex SPI ports with three peripheral chip selects Two high-speed UARTs (up to 1 Mb/s) Two master and slave I2C interfaces GPIO with four 32-bit banks, of which up to 54 bits can be used with the PS I/O (one bank of 32b and one bank of 22b) and up to 64 bits (up to two banks of 32b) connected to the Programmable Logic Up to 54 flexible multiplexed I/O (MIO) for peripheral pin assignments True Dual-Port Up to 72 bits wide Configurable as dual 18 Kb