燁弘軒電子最新到貨 有最新批號 朱生 13410068358 微信同號 可提供樣品 批量 方案 技術資料 技術支持 竭誠為您提供優質服務。需要查詢更多產品 www.yhx-group.com 。
MAX14750 MAX14750BEWA+ MAX14750EVKIT# 有現貨 可添加我們聯系方式獲取最優惠價格
原廠原包原標原裝每一片都來自正規渠道每一片都可追溯
The MAX14750 are compact power-management solutions for space-constrained, battery-powered applications where size and efficiency are critical. Both devices integrate a power switch, a linear regulator, a buck regulator, and a buck-boost regulator.
The MAX14720 is designed to be the primary power-management device and is ideal for either non-rechargeable battery (coin-cell, dual alkaline) applications or for rechargeable solutions where the battery is removable and charged separately. The device includes a button monitor and sequencer.
The MAX14750 works well as a companion to a charger or PMIC in rechargeable applications. It provides direct pin control of each function and allows greater flexibility for controlling sequencing.
The devices include two programmable micro-IQ, high-efficiency switching converters: a buck-boost regulator and a synchronous buck regulator. These regulators feature a burst mode for increased efficiency during light-load operation.
The low-dropout linear regulator has a programmable output. It can also operate as a power switch that can disconnect the quiescent load of system peripherals.
The devices also include a power switch with battery-monitoring capability. The switch can isolate the battery from all system loads to maximize battery life when not operating. It is also used to isolate the battery-impedance measurements. This switch can operate as a general-purpose load switch as well.
The MAX14720 includes a programmable power controller that allows the device to be configured either for use in applications that require a true off state or for always-on applications. This controller provides a delayed reset signal, voltage sequencing, and customized button timing for on/off control and recovery hard reset.
Both devices also include a multiplexer for monitoring the power inputs and outputs of each function.
These devices are available in a 25-bump, 0.4mm pitch, 2.26mm x 2.14mm wafer-level package (WLP) and operate over the -40°C to +85°C extended temperature range.
Extended System Battery Use Time
Input Voltage From 1.71V to 5.5V
Output Programmable From 0.9V to 4.0V
0. 9μA Quiescent Current
Configurable as Load Switch
Input Voltage from 1.8V to 5.5V
Output Voltage Programmable from 1.0V to 2.0V
0.9μA Quiescent Current
Input Voltage from 1.8V to 5.5V
Output Voltage Programmable from 2.5V to 5V
1.1μA Quiescent Current
Programmable Current Limit
Micro-IQ250mW Buck-Boost Regulator
Micro-IQ200mA Buck Regulator
Micro-IQ100mA LDO
Extend Product Shelf-Life
250mΩ (max) at 2.7V
500mΩ (max) at 1.8V
120nA Battery Current
Battery Seal Mode (MAX14720)
Power Switch On-Resistance
Battery Impedance Detector
Easy-to-Implement System Control
Push-Button Monitoring to Enable Ultra-Low Power Shipping Mode
Disconnects All Loads From Battery and Reduces Leakage to Less than 1μA
Power-On Reset (POR) Delay and Voltage Sequencing
Configurable Power Mode and Reset Behavior (MAX14720)
Individual Enable Pins (MAX14750)
Voltage Monitor Multiplexer
I2C Control Interface
